Home Up Call me back Contents Immunology Infectious agents Cellular Biology Molecular biology InstrumentsPower supply Refrigeretors Centrifuges BRADY Labpal printer Microdoc PEG-IT


       Pricelist 2010 

redcoon België GENTAUR BVBA

VAT BE0473327336

Av. de l Armee 68 B4

1040 Brussels BELGIUM

  Tel + 32 16 58 90 45 

Fax + 32 16 50 90 45


SIRET 48423788800017

Rue Lagrange, 9

75005 Paris, France

 Tel 01 43 25 01 50

Fax 01 43 25 01 60 


52074 Aachen, Germany

 Tel +32 16 58 90 45

Fax +32 16 50 90 45

GENTAUR Pol Sp. Z.o.o. Ulica Ogarna 15/19B m2

80-826 GDANSK

Tel 00 48 51 760 77 08

Fax: 00 32 16 50 90 45


23015 Milano, Italy

 Tel 02 36 00 65 93

Fax 02 36 00 65 94

Česká republika Praha



Finland Helsset

Ελλάς Αθήνα

Ireland Dublin


Magyarország Budapest


Norge Oslo


Sverige Stockholm

Schweiz Züri


Northern America 

Canada Montreal

US New York


Other Countries redcoon België
0032 (0)16 41 44 07


electrophoresis power supplies 200-6000 V

Manual programming
The manual mode permits to set voltage, current, power and time for a routine electrophoresis run. Parameters can be changed temporarily without interrupting the run.
Method programming
Up to 9 different programs, each with 9 steps, of frequently used parameters can be stored in the non-volatile memory for future recall. Reads voltage in 1 V steps, current in 1 mA steps and power in 1 W steps. Each step is able to recall a next one, providing a flexible multiple step function for special techniques. Parameters of the running step can be changed temporarily without interrupting the run.
Voltage ramp
The method mode also permits to program a linear voltage gradient for any step provided the limiting current or power is not attained.
Timer or volt-hour controlled operation is a useful standard feature on all models. The microcomputer will automatically terminate the run when the count down of the selected value is achieved.
Automatic cross-over
Each model has constant voltage, constant current, constant power capabilities with automatic cross-over and shows which parameter is kept constant.
Automatic recovery after power failure
In case of a mains drop out the instrument will automatically continue the run for the remaining time.
Stores periodically up to 3600 output values (voltage, current and power, time or volthours) including program number and step.
Data Transfer
A free data acquisition software for PC is available optionally. Download software  (attention: .NET Framework 1.1 is required!). It permits to visualise and examine the stored run details.
Remote control
All power supplies can be controlled by a computer using special commands (contact support@consort.be  for more information).
Safety precautions
The user is protected from potential shock hazard since the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected. The instrument is fully protected against any overload condition including accidental short circuit of the output. The high voltage cannot suddenly appear at the outputs. It will always increase smoothly up to one of the pre-set limits is reached. Galvanic RS232 input/output insulation prevents dangerous ground loop interferences when connected to a computer.

(Model EV222 has no method programming, data-logging or remote control possibility)

: 0...200 V, 0...200 mA, 0...20 W

EV243: 0...400 V, 0...300 mA, 0...50 W
EV231: 0...300 V, 0...1000 mA, 0...150 W
EV265: 0...600 V, 0...500 mA, 0...150 W
EV202: 0...300 V, 0...2000 mA, 0...300 W
EV261: 0...600 V, 0...1000 mA, 0...300 W
EV215: 0...1200 V, 0...500 mA, 0...300 W
EV232: 0...3000 V, 0...150 mA, 0...150 W
EV233: 0...3000 V, 0...300 mA, p0...300 W
EV262: 0...6000 V, 0...150 mA, 0...300 W


Send mail to webmaster@gentaur.com with questions or comments about this web site.Copyright © 2009 GENTAUR Last modified: 04/01/10